Getting prepared
Before you begin you must be sure to be well equipped for every aspect of the build that you will face. If you do not have the proper tools it will cause portions of the build to take much longer than necessary. Here is a list of required tools to help your entire ICF installation go smoothly:
- String line
- Plumb bob
- Step Ladder
- Marker (Sharpie)
- Chalk line
- 200’ Tape measure
- 25’ Tape measure
- Hammer
- Nails (3” and 2”)
- Transit or Laser
- Spirit Level
- Cordless Drill
- Screws and bits
- Pruning or Hand Saw
- Portable Table Saw
- Rebar bender/cutter
- Internal Vibrator
- Contractor-grade foam gun
- Low expansion foam adhesive
- Bolt cutters
- 36” zip ties or horizontal hooks
- Utility Knife/Box Cutter
- Loop Tie Twister/Spinner
- Generator
- Framing Square
- Keyhole Saw
- Reciprocating Saw
- Tin Snips/Side Cutters
Many products and tools are available for purchase or rental. Be sure to ask us at ICForming about specialty tools for rent.